Direct Rendering Manager (XFree86 DRI support)

CONFIG_DRM:

Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select the module that's right for your graphics card from the list below. These modules provide support for synchronization, security, and DMA transfers. Please see <http://dri.sourceforge.net/> for more details.  You should also select and configure AGP (/dev/agpgart) support.

< Exit >

dfx Banshee/Voodoo3+

CONFIG_DRM_TDFX:

Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), graphics card. If M is selected, the module will be called tdfx.o.

< Exit >

3dlabs GMX 2000

CONFIG_DRM_GAMMA:

Choose this option if you have a 3dlabs GMX 2000 graphics card. If M is selected, the module will be called gamma.o.

< Exit >

ATI Rage 128

CONFIG_DRM_R128":

Choose this option if you have an ATI Rage 128 graphics card. If M is selected, the module will be called r128.o. AGP support for this card is strongly suggested (unless you have a PCI version).

< Exit >

ATI Radeon

CONFIG_DRM_RADEON":

Choose this option if you have an ATI Radeon graphics card. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. There is a product page at <https://support.ati.com/ics/support/KBAnswer.asp?questionID=1176> If M is selected, the module will be called radeon.o.

< Exit >

Intel I810

CONFIG_DRM_I810":

Choose this option if you have an Intel I810 graphics card. If M is selected, the module will be called i810.o. AGP support is required for this driver to work.

< Exit >

Intel I830

CONFIG_DRM_I830":

Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM or 865G integrated graphics. If M is selected, the module will be called i830.o. AGP support is required for this driver to work.

< Exit >

Matrox g200/g400

CONFIG_MGA":

Choose this option if you have a Matrox G200, G400 or G450 graphics card. If M is selected, the module will be called mga.o. AGP support is required for this driver to work.

< Exit >